This article was posted 04/04/2008 and is most likely outdated.

Ohio Reverts back to the 2005 NEC, but does it end there?
 

 

Topic - NEC
Subject - Ohio Reverts back to the 2005 NEC, but does it end there?

April 4, 2008
This newsletter was sent to 28751 newsletter subscribers
Ask a Question |  Weekly Code Graphic |  Quizzes |  Free Stuff |  Instructors | Online Training |  Products | Seminars | Subscribe | Unsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

 

Ohio Reverts back to the 2005 NEC, but does it end there? Image

 

Because of the cost of AFCI's and tamper resistant receptacles, an executive order was enacted to revert back to the 2005 NEC from the previously adopted 2008 edition. By my estimates, AFCI's and tamper resistance receptacle requirements in the 2008 will increase the cost of electrical contraction for a single family home by about $1000. Now that the Home Builders are becoming aware of the increase in cost of a dwelling unit, states are taking the following actions as it relates to the 2008 NEC:

(1) Not adopting the 2008 NEC

(2) Adopt the 2008 NEC, without AFCI requirements

(3) Revert back to the 2005 NEC if 2008 edition was adopted

 

Click here or on the image above to view the executive order pdf.

 

See NEMA Code Alerts - http://www.nema.org/stds/fieldreps/codealerts/

 

 

 
Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here
 
Comments

  • So if the price of drywall goes up are we only going to drywall part of the new homes now?

    What is a $1,000 compared to a new home price of $200k-$500k?

    Very bad decision, in my opinion, for the areas to accept this type of action. So can someone safety shop the code cycle that fits their budget? I guess I will soon be seeing rolls of 12-2 aluminum since the price of copper is so high.

    Todd
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter