This article was posted 04/04/2008 and is most likely outdated.

Ohio Reverts back to the 2005 NEC, but does it end there?
 

 

Topic - NEC
Subject - Ohio Reverts back to the 2005 NEC, but does it end there?

April 4, 2008
This newsletter was sent to 28751 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

 

Ohio Reverts back to the 2005 NEC, but does it end there? Image

 

Because of the cost of AFCI's and tamper resistant receptacles, an executive order was enacted to revert back to the 2005 NEC from the previously adopted 2008 edition. By my estimates, AFCI's and tamper resistance receptacle requirements in the 2008 will increase the cost of electrical contraction for a single family home by about $1000. Now that the Home Builders are becoming aware of the increase in cost of a dwelling unit, states are taking the following actions as it relates to the 2008 NEC:

(1) Not adopting the 2008 NEC

(2) Adopt the 2008 NEC, without AFCI requirements

(3) Revert back to the 2005 NEC if 2008 edition was adopted

 

Click here or on the image above to view the executive order pdf.

 

See NEMA Code Alerts - http://www.nema.org/stds/fieldreps/codealerts/

 

 

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • I'd like to know where they came up with the "$1000.00" figure. As yet I can't get a supplier to give me a straight answer on the price of a tamper proof recep ( other than the $12 I've paid in the past). And don't even get me started on the AFCI's!!

    What this change REALLY mandates is a lower quality of wiring for houses, because I (we) will be competing against contractors who will STRETCH their circuits to the max ( and a bit beyond) and skimp on recep spacing.

    A few extra circuits "just in case" and a half a dozen or so more receps "just to be nice" suddenly add $200 -300 to the bid (or final price), enough to swing the building contractor to hire the El Cheapo guy.

    And, sorry, you can't convince me that it's a "safety thing" when AFCI's aren't required EVERYWHERE.

    Why the exception for areas already covered by the GFI rules? Don't fires start there too? And the tamper proof receps require a PERFECT male cord end to work. How many service calls/call backs will that cause as people adjust to their lamps, radios etc... not working anymore??

    Daniel Smith

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter