Something doesn't sound right here. If the electrical contractors are licensed they will have no problem with pulling permits. But permits are not pulled until they get a signed contract. Having a non-response from 25 contractors is not believable unless there is more to the story. At least some would give you a price but will charge for their time.
We would classify this work as troubleshooting with time and material rates then test the insulation of each wire with a megger. Then either replace it or deam it safe. Motor loads can be checked and if load is within the name-plate rating deamed safe. Of course we would pull a permit before starting but after we are comfortable that we will get paid. Van
|