You have a unque problem. in most cases you will turn power back on than do your testing. Lightning has a tendacy to complete its destrutive path, turning power on will probaly show you everything. I can see why you are having difficultly getting a electrician to certify this system. You need a electrical engeneer to certify the system. The only test you can do to ensure that your wiring is safe is a Hi Pot test on your wires to see if there was damage to the insulation on wires that lighting attacked. Your panel box should be inspected to be sure no damage has occured. Be sure that your smoke dectors have been properly tested. perry
|