Q: What should an electrical company do?
A: You need an electrical testing firm. Look for one that is a full NETA certified company that has professional electrical engineers on staff. See the following link: http://netaworld.org/Category.cfm?CategoryID=4 or call my firm at (800) 992-3826.
Q: What certification or license should they possess or subcontract out to do all the work and testing to make me and my family feel safe?
A: A Full NETA certified test company will have the appropriate equipment, training and experience to do proper investigation and testing. They are a third-party test entity who will "certify" the conditions. You then want a Professional Engineer's opinion, either an engineer from the NETA company or another. The engineer needs to be an electrical engineer experienced in this field and licensed (P.E.) in your state. Do not accept an engineer sent by the insurance company - you need an independent test company with a test technician who is NETA certified and a professional engineer two individuals but can be from the same company.
3. Should all the wiring be replaced that is on each run including all switches, outlets, light fixtures, and fans?
Work should be prescribed based on the testing and findings of the NETA test firm and the comments from the engineer.
When in doubt replace it.
I've elevated up directly to my insurance company and they will have their subcontract manager call me back to get me help. What tips can you give me to help me out? Bruce
|