This article was posted 09/13/2007 and is most likely outdated.

Integrating Electronic Equipment and Power into Rack Enclosures
 

 

Topic - Grounding and Bonding
Subject - Integrating Electronic Equipment and Power into Rack Enclosures

September 13, 2007
This newsletter was sent to 26784 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Integrating Electronic Equipment and Power into Rack Enclosures

 

Power Distribution and Grounding of Audio, Video and Telecommunications Equipment

 

ImageThis White Paper provided by Middle Atlantic Products aims to provide installers with a basic understanding of properly installed power distribution. The intent is not to make audio/video equipment installers into electricians.

 

In order to get a good understanding of how some potential power and grounding problems present themselves, basic knowledge of power distribution is required. It is the intent of this document to provide this information.

 

Click here to visit the Middle Atlantic Products Website page where you can download this paper in its entirety.

 

 

 

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • I was pleased to see this document because it shows AV technicians how to install their systems to work properly while complying with NEC. Electronics technicians have little understanding of power wiring requirements. I have had confrontations with electronic system installers who insist that their equipment will not function if it is installed to comply with NEC! AV and telecommunications grounding must be handled carefully to avoid operational problems. For further information on telecommunications grounding details, refer to the Telecommunications Distribution Methods Manual published by BICSI.

    Jim Cook

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter