This article was posted 08/31/2007 and is most likely outdated.

Article 525 Carnivals, Circuses, Fairs, and Similar Events - 525.23
 

 

Subject - Article 525 Carnivals, Circuses, Fairs, and Similar Events - 525.23

August 31, 2007
This newsletter was sent to 7539 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Article 525   Hi Res - Cable/DSL [13771Kb]
VIEWING Video FILE requires
Real Media Player [ FREE ]
  
Carnivals, Circuses, Fairs, and Similar Events

525.23 GFCI Protection

This section was extensively rewritten to clarify where GFCI protection is required, where GFCI protection is not required, and where GFCI protection is not permitted.

(A) Where GFCI Protection Is Required. Figure 525-1
(1) GFCI protection is required for all 15 and 20A, 125V nonlocking type receptacles used for disassembly and reassembly of amusement rides and attractions, or readily accessible to the general public.

(2) GFCI protection is required for all equipment that is readily accessible to the general public if it is supplied from a 15 or 20A, 125V branch circuit
.


Author’s Comment: Circuits are rated 120V and receptacles are rated 125V. I’m sure the 2005 Code will change the voltage rating of this circuit from 125V to 120V.

Ground-fault protection can be an integral part of the attachment plug or located in the power-supply cord, within 12 in. of the attachment plug. Listed cord sets incorporating ground-fault circuit-interrupter for personnel can be used to meet this requirement.

(B) GFCI Protection Not Required. GFCI protection is not required for receptacles of the locking type.

(C) GFCI Protection Not Permitted. GFCI protection is not permitted for egress lighting.

Author’s Comment: The purpose of not permitting egress lighting to be GFCI protected is to ensure that exit lighting is maintained.


Figure 525-1
(Click on image to enlarge)

       
 

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • Mike -

    I can save the cost of a GFI, by switching to twist-lock in place of straight blade recepatacle and cord cap on 15 & 20 Amp 120 volt circuits? Is this correct? and Twist-locks protect me from groundfaults? I must be missing something.

    Don Renbarger

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter