This article was posted 08/13/2007 and is most likely outdated.

The Confusion Surrounding “Stray Voltage”
 

 

Topic - Grounding and Bonding
Subject - The Confusion Surrounding “Stray Voltage”

August 13, 2007
This newsletter was sent to 25603 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

The Confusion Surrounding “Stray Voltage”


 

ImageWhile “stray voltage” has been a concern for farm livestock for many years, it is only within the past few years that the term has been associated with human fatalities. The industry has seen an expansion of the term’s usage to describe events that some engineers feel is incorrect. This situation has resulted in costs to utilities exceeding many millions of dollars that has a questionable impact on customers increased safety.

 

The purpose of this paper is to discuss the confusion that now exists in the area of “stray voltage”. The paper will discuss the traditional definition of the term “stray voltage”, as well as the recent usage of the phrase to describe more dangerous conditions such as step-and-touch voltages, temporary overvoltages, contact voltages, etc. Finally, the paper will address the status of the industries response to this issue. It will discuss the measures taken by some utilities as well as the IEEE to establish some sort of industry guidelines to address these issues.

 

Click here to review this paper written by Jim Burke, InfraSource Inc., Fellow, IEEE

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • Stray current is one of the biggest problem in cathodic protection applications when the protected structure is in vicinity with other existing underground structures. Therefore, is very important to control the current closing path. Stray voltage is very important for induction motors (VSD driven) and to avoid this tranversal voltage the bearings are insulated. Usually, the best method for domestic applications is to achieve an equalization of potential for all metalic structures.

    Constantin

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter