This article was posted 08/13/2007 and is most likely outdated.

The Confusion Surrounding “Stray Voltage”
 

 

Topic - Grounding and Bonding
Subject - The Confusion Surrounding “Stray Voltage”

August 13, 2007
This newsletter was sent to 25603 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

The Confusion Surrounding “Stray Voltage”


 

ImageWhile “stray voltage” has been a concern for farm livestock for many years, it is only within the past few years that the term has been associated with human fatalities. The industry has seen an expansion of the term’s usage to describe events that some engineers feel is incorrect. This situation has resulted in costs to utilities exceeding many millions of dollars that has a questionable impact on customers increased safety.

 

The purpose of this paper is to discuss the confusion that now exists in the area of “stray voltage”. The paper will discuss the traditional definition of the term “stray voltage”, as well as the recent usage of the phrase to describe more dangerous conditions such as step-and-touch voltages, temporary overvoltages, contact voltages, etc. Finally, the paper will address the status of the industries response to this issue. It will discuss the measures taken by some utilities as well as the IEEE to establish some sort of industry guidelines to address these issues.

 

Click here to review this paper written by Jim Burke, InfraSource Inc., Fellow, IEEE

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • The last lines from Mr. Burke say it all:

    "The general reduction of industry participation in the standards writing function of IEEE has created a situation where non professionals, such as state legislators and lawyers are rewriting definitions, creating new terms and creating arbitrary limits and testing procedures costing the industry many millions of dollars which could have been used far more wisely to promote both safety and reliability."

    Legislators, Judges, and Lawyers have those jobs because they weren't qualified for and couldn't find honest work. If they had IQ and ethical requirements, we'd need to have a draft instead of an election - and would probably be better off for it.

    Matt

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter