First of all I would like to thank Mike Holt for giving me this opportunity. I would also like to thank everyone who has commented about the T-33 Standoff Bracket.
I designed this bracket for CMU (concrete masonary unit) which is 16" long, 8" tall and 8" deep. Here in Oklahoma our schools interior and exterior walls are built from these blocks. We install a masonary box and run a piece of EMT through the center of the block and turn it out above the ceiling. We then would cut the conduit as close as we could to the block and install the connector then the box so now we have the conduit supporting the box and that is the way it has been here done for years. I would be more than happy to e-mail pictures of this block application to anyone interested. My e-mail address is SPJ112233@yahoo.com. Thanks again. Philip Tompkins
| 
This product was developed for block wall applications, but it also works well on sheetrock. The bracket has a hole for a 1/2 inch or 3/4 inch connector. It has also been pre-punched for a bond screw. Out of the box the bracket is 2 inches tall but can be manipulated up to 3 inches tall.
Send to a Friend