This article was posted 03/14/2007 and is most likely outdated.

Equipotential Grids Required by the NEC - Are they Useless?
 

 
Topic - NEC
Subject - Equipotential Grids Required by the NEC - Are they Useless?

March 14, 2007  

Ask a Question |  Weekly Code Graphic |  Quizzes |  Free Stuff |  Instructors | Online Training |  Products | Seminars | Subscribe | Unsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Equipotential Grids Required by the NEC - Are they Useless?

 

ImageThe following paper describes Stray Voltage Service’s www.strayvoltage.ca approach in dealing with farm neutral to earth voltage. They have tested over 2,500 farms for stray voltage and this maybe more than any organization has done. The approach they offer provides real world low cost technical solutions to stray voltage in two broad ways; first by balancing secondary farm neutral loads and then secondly by reducing the remaining non-engineered electricity paths from passing through farm animals. This paper identifies the technical failures of the past and current standard stray voltage mitigation techniques and its outcomes. This paper describes some impressive results offered using our remote monitoring oscilloscope services to farmers across North America and the world.

 

Click here or on the image to view this paper titled: Solutions to Farm Neutral to Earth Voltage provided by Stray Voltage Services.

 

 
Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here
 
Comments

  • They're more than useless. They are dangerous as they are causing a dc component voltage to always be present under the cows from the constant charging of the different metals by the ever present utility neutral current flowing over the bonded floor back through the barn into the main service ground and back to the grid. We need isolation from the utility neutrals before metal will work in the floor. We may need to go to a fibermesh rebar system instead.

    Tim Arneson
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter