This article was posted 06/21/2006 and is most likely outdated.

State Warns Of Faulty Satellite TV Installations
 

 
Topic - Grounding and Bonding
Subject - State Warns Of Faulty Satellite TV Installations

June 21, 2006  

| Ask a Question |  Code Graphic Code Quiz - All New! |  Free Stuff Instructors | Feedback
Online Training Products | Seminars | SubscribeUnsubscribe |
Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

State Warns Of Faulty Satellite TV Installations

 

The largest Dish Network affiliate in the Midwest has agreed to inspect 6,700 systems installed between Rochester and St. Cloud -- including the Twin Cities -- for improper installation that may be a safety risk.

The Minnesota Department of Labor and Industry said Tuesday that Dish Network and Galaxy 1 Marketing of Bettendorf, Iowa, were cooperating after a random sampling of 100 installations showed 80 didn't meet the state's electrical code. The department said the improper installations increase the risk of lightning blowing out electronic gear, starting a fire or injuring people.

Officials said the systems were installed for Dish Network in 2004 and 2005. Labor and Industry spokesman James Honerman said no injuries or fires have been tied to the improperly installed systems. Faulty grounding was the most common problem, he said.

The inspections and necessary corrections will be done without cost to consumers. Honerman said the risk exists even if the satellite TV systems aren't being used.

 

Article from the Associated Press of St. Paul.

Mike Holt’s Comment: I am actually surprised that 20% of the installations were NEC compliant and I applaud the State of Minnesota Department of Labor and Industry for their efforts. We can expect about the same NEC compliance (less than 20%) nationwide, and we can expect that same rate of compliance (less than 20%) for cable television (CATV) industry. To the Minnesota Department of Labor and Industry, please do a sample on the grounding practices of CATV industry, this might open your eyes even further. I hope that other states would consider this issue as well.

[ View More Newsletters ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

F o r w a r d   t h i s   N e w s l e t t e r   t o   a   F r i e n d !
Do you have a friend, relative, or colleague who you think would be interested in receiving this free newsletter? If so, we encourage you to forward this message along to them. If you received this email from someone else, and wish to receive your own free issues of our newsletter, sign up today!

C o n t a c t    I n f o r m a t i o n
 

Copyright © 2002, 2003, 2004, 2005, 2006 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Comments
  • I asked my Minnesota cable company, Comcast, to bring my CATV grounding up to code. They informed me I was 'grandfathered' in and a change wasn't required but they reluctantly came out anyway after I complained.

    After they completed the job, I inspected the work. They had run the CATV around the house to the main Service Entrance and had installed the correct CATV grounding connector but the 10 guage wire running from it to the main house ground wire had already snapped off at the CATV grounding connector. At the other end, they had attached the 10 guage to the house's main ground wire with a clamp that was clamped directly on the main ground wire. Unfortunately, the main ground wire had about 4 coats of paint on it which they just clamped on top of without cleaning it off. The Phone line had the same poorly bonded ground wire. Needless to say, I had to sand off the paint, reattach the wire and fix it myself. My call to Comcast was never returned.



Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter