This article was posted 09/22/2006 and is most likely outdated.

Article 90 Introduction
 

 
Subject - Article 90 Introduction

September 22, 2006  

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Article 90   Hi Res - Cable/DSL [1628Kb]
VIEWING Video FILE requires
Real Media Player [ FREE ]
Introduction

90.2 Scope of NEC

New FPN identifies the type of organizations that may be exempt from the NEC requirements.

(B) What
Isn’t Covered
. The National Electrical Code, doesn’t apply to the following applications:
(4) Communications Utilities. The installation requirements of the NEC do not apply to communications (telephone), CATV, or network-powered broadband utility equipment located in building spaces used exclusively for such use or outdoors, if the installation is under the exclusive control of the communications utility.
Figure 90-1

(5) Electric Utilities. The NEC doesn’t apply to electric installations under the exclusive control of an electric utility where such installations:
a. Consist of service drops or service laterals and associated metering.
Figure 90-2
b. Are located on legally established easements, rights-of-way, or by other agreements recognized by public/utility regulatory agencies, or property owned or leased by the electric utility. Figure 90-3
c. Are on property owned or leased by the electric utility for the purpose of generation, transformation, transmission, distribution, or metering of electric energy. See Figure 90-3

FPN to 90.2(B)(4) and (5): Utilities include entities that install, operate and maintain communications systems (telephone, CATV, Internet, satellite or data services) or electric supply systems (generation, transmission or distribution systems) and are designated or recognized by governmental law or regulation by public service/utility commissions. Utilities may be subject to compliance with codes and standards covering their regulated activities as adopted under governmental law or regulation.


Figure 90-1
(Click on image to enlarge)


Figure 90-2
(Click on image to enlarge)


Figure 90-3
(Click on image to enlarge)

   

[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Contact our Webmaster

Comments
  • Having done quite a bit of work for the FAA ( Federal Aviation Administration) and the mining industry, I am surprised that these two entities weren't included in the list. They both are not under local jurisdiction control, and they have their own codes and specs that must be observed and conformed to whenever work is being performed. I do not know, however, if this is the case on new construction. I do know that their own specs and codes are far more stringent, especially when it comes to grounding. I was talking with a friend about this who brought up his experience with the marine industry. Apparently there are issues with who has jurisdiction there also.

    Stacy Hinson

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter