Grounding vs Bonding Online Training

This article was posted 03/03/2006 and is most likely outdated.

Grounding vs Bonding: 250.70 Grounding Electrode Conductor Termination Fitting

March 3, 2006

View Comments | Add Comments | Notify Me When Comments Are Added

PART III. GROUNDING ELECTRODE SYSTEM AND GROUNDING ELECTRODE CONDUCTOR

VIEWING Video FILE requires
Real Media Player [ FREE ]

Sections

250.70 Grounding Electrode Conductor Termination Fitting.

The grounding electrode conductor must terminate to the grounding electrode by exothermic welding, listed lugs, listed pressure connectors, listed clamps, or other listed means. In addition, termination fittings must be listed for the materials of the grounding electrode.

When the termination to a grounding electrode is encased in concrete or buried, the termination fitting must be listed and identified for this purpose. No more than one conductor can terminate on a single clamp or fitting unless the clamp or fitting is listed for multiple connections. Figure 250–121

Figure 250–121
(Click on image to enlarge)

Comments

Need help for wrought iron bonding connectors within 5' of body water. Is there a website that can help? Thanks, Lance

Lance Sinclair

Reply from: Mike Holt
Post your question on the Code Forum at www.MikeHolt.com.

Reply to this comment


* Your Name:	Your name will appear under your comments.
* Your Email:	Your email address is not displayed.
* Comments:	This newsletter is closed to new comments. Email Notification Options: Notify me when a reply is posted to this comment Notify me whenever a comment is posted to this newsletter