|
The Electrical Safety Authority (ESA) is warning end users and contractors about a potential shock hazard
associated with the use of Thomas & Betts In-line Fuse Holder Models 65 and 65U.
|
The Electrical Safety Authority (ESA) is warning end users and contractors about a potential shock hazard
associated with the use of Thomas & Betts In-line Fuse Holder Models 65 and 65U.
ESA became aware that the fuse remains energized and connected to the line side of the circuit when the two
halves are separated during maintenance and examination. This potential hazardous condition occurs when the
fuse holder is not assembled in accordance to the accompanying manufacturer's instructions.
Direction:
End users and contractors are cautioned to ensure that they follow the manufacturer's installation instructions
when using the Thomas & Betts In-line Fuse Holder Models 65 and 65U.
Click here to access the ESA FLASH 19-36-FL.
|
|
