This article was posted 08/09/2006 and is most likely outdated.

Top 101 NEC Rules – Part 4 of 4 (FINAL)
 

 
Subject - Top 101 NEC Rules – Part 4 of 4 (FINAL)

August 9, 2006  

| Ask a Question |  Code Graphic Code Quiz - All New! |  Free Stuff Instructors | Feedback
Online Training Products | Seminars | SubscribeUnsubscribe |
Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Top 101 NEC Rules – Part 4 of 4 (FINAL)

image

If you missed Parts 1 – 3, you can download them now:

Part 1

Part 2

Part 3

 

Download Part 4

 

We at Mike Holt Enterprises try to provide as much as we can to the industry at no charge. For this reason we’ve created a free “Top 101 NEC Rules” textbook. The material in this textbook was extracted from Mike's Understanding the 2005 NEC textbook.

 

It’s a quick reference and guide to make sure you’re up to speed on these very important rules.

 

Because of the size of the textbook we’ve decided to make it available in four parts. Over the last 3 months we’ve sent Parts 1 – 3, and now here is the final Part 4.

 

Details of Part 4

Rule 76—314.25 Covers and Canopies

Rule 77— 314.28 Boxes and Conduit Bodies for Conductors 4 AWG and Larger.

Rule 78—314.29 Wiring to be Accessible

Rule 79—320.10 Uses Permitted

Rule 80—320.12 Uses Not Permitted

Rule 81—330.10 Uses Permitted

Rule 83—330.12 Uses Not Permitted

Rule 83—334.10 Uses Permitted

Rule 84—334.12 Uses Not Permitted

Rule 85—338.10 Uses Permitted

Rule 86—362.12 Uses Not Permitted

Rule 87—376.12 Uses Not Permitted

Rule 88—404.9 Switch Cover Plates (Faceplate)

Rule 89—406.8 Receptacles in Damp or Wet Locations

Rule 90— 408.4 Circuit Directory or Circuit Identification

Rule 91—408.7 Unused Openings

Rule 92— 422.31 Permanently Connected Appliance Disconnect

Rule 93— 422.33 Cord-and-Plug Connected Appliance Disconnect

Rule 94— 430.6 Table FLC Versus Motor Nameplate Current Rating

Rule 95—430.22 Single Motor—Conductor Size

Rule 96— 430.52 Branch-Circuit Short-Circuit and Ground-Fault Protection

Rule 97—430.74 Disconnect for Control Circuit

Rule 98—430.102 Disconnect Requirement

Rule 99— 440.22 Short-Circuit and Ground-Fault Protection Device Size

Rule 100— 440.32 Conductor Size—One Motor-Compressor

Rule 101—450.3 Overcurrent Protection

 

 

Click here or on the image above to download Part 4 (4.04 MB), but be advised that this download may take a few minutes to download depending on your internet connection speed. If you encounter a problem opening this file, be sure you have the latest version of Adobe Acrobat installed on your system (click here).

 

 

[ View More Newsletters ] [ Send to a Friend ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © 2002, 2003, 2004, 2005, 2006 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

To suggest a topic or submit content for a newsletter: nlsuggest@mikeholt.com
Experiencing a Problem? Contact our Webmaster

Comments
  • Thank you MIke,

    The level of professionalism in everything you publish is of the first magnitude!

    It is heartening to know there are people who try to make things better for us all, or at least safer.

    Mark Prairie

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter