This article was posted 06/21/2006 and is most likely outdated.

State Warns Of Faulty Satellite TV Installations
 

 
Topic - Grounding and Bonding
Subject - State Warns Of Faulty Satellite TV Installations

June 21, 2006  

| Ask a Question |  Code Graphic Code Quiz - All New! |  Free Stuff Instructors | Feedback
Online Training Products | Seminars | SubscribeUnsubscribe |
Change Email Address |
[ image1 Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

State Warns Of Faulty Satellite TV Installations

 

The largest Dish Network affiliate in the Midwest has agreed to inspect 6,700 systems installed between Rochester and St. Cloud -- including the Twin Cities -- for improper installation that may be a safety risk.

The Minnesota Department of Labor and Industry said Tuesday that Dish Network and Galaxy 1 Marketing of Bettendorf, Iowa, were cooperating after a random sampling of 100 installations showed 80 didn't meet the state's electrical code. The department said the improper installations increase the risk of lightning blowing out electronic gear, starting a fire or injuring people.

Officials said the systems were installed for Dish Network in 2004 and 2005. Labor and Industry spokesman James Honerman said no injuries or fires have been tied to the improperly installed systems. Faulty grounding was the most common problem, he said.

The inspections and necessary corrections will be done without cost to consumers. Honerman said the risk exists even if the satellite TV systems aren't being used.

 

Article from the Associated Press of St. Paul.

Mike Holt’s Comment: I am actually surprised that 20% of the installations were NEC compliant and I applaud the State of Minnesota Department of Labor and Industry for their efforts. We can expect about the same NEC compliance (less than 20%) nationwide, and we can expect that same rate of compliance (less than 20%) for cable television (CATV) industry. To the Minnesota Department of Labor and Industry, please do a sample on the grounding practices of CATV industry, this might open your eyes even further. I hope that other states would consider this issue as well.

[ View More Newsletters ] [ Please Reply With Your Comments | View Comments | Notify Me When Comments Are Added ]

F o r w a r d   t h i s   N e w s l e t t e r   t o   a   F r i e n d !
Do you have a friend, relative, or colleague who you think would be interested in receiving this free newsletter? If so, we encourage you to forward this message along to them. If you received this email from someone else, and wish to receive your own free issues of our newsletter, sign up today!

C o n t a c t    I n f o r m a t i o n
 

Copyright © 2002, 2003, 2004, 2005, 2006 Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Comments
  • Please explain further. This is completely untrue Mike. Yes there is a serious problem with grounding in this industry. Grounding is very important, but I have seen many lightning strikes that came in destryed the TV, satellite recever. The Fridge. The switch for the reciever. This came in from the powerline. Oh it fried the satellite system to. I have seen systems that were not grounded, and the same thing happened. Explain that. Again I don't disagree with making the system complient, but lying is unacceptable. This is ludacris that You and MN think that this will actully stop a fire. It can happen anyway whether it is grounded, or not. It's possible it may reduce it somewhat, but why not just say that.



Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter