This article was posted 09/25/2012 and is most likely outdated.

Mike Holt - Helping the Little Guy - Exterior Retractable Electric Receptacle , a New Product
header
Helping the Little Guy - Exterior Retractable Electric Receptacle , a New Product

New Product - Exterior Retractable Electric Receptacle

Image1

We were recently contacted by John Neyens, a consulting engineer about his Power Dugout Retractable Receptacle. John developed this product to fulfill a request expressed by one of his customers and would like to get the word out about this product to the electrical community. If you have any feedback for John please feel free to contact him. We love hearing stories like these; where a simple request leads to a new product or innovation that could greatly benefit the industry. We hope that this story inspires you to think 'outside the box' the next time you're faced with a challenge and come up with a solution to a problem rather than simply saying it can't be done.

John Neyens' Story:

Hi my name is John Neyens and I live and work as a consulting engineer in Quincy, Illinois. I graduated with a degree is in mechanical engineering from the University of Missouri in 2006, but most of my work experience has been in the electrical industry. Even though I had not planned on working in the electrical industry while I was in school, I have found it to be very rewarding.

Given my lack of formal training for the electrical industry, almost all of my knowledge of the electrical industry has come from on the job training. As I am sure others in this similar situation and even those with extensive formal training have experienced, I was humbled on a regular basis by the amount of information I needed to acquire to work in the electrical field. Fortunately, I had the privilege to work with several very experienced and knowledgeable individuals who helped to show me the ropes of the electrical industry. To this day I cherish the moments when I can get a few moments of time and input from more experienced individuals in the industry, and I encourage all of those with this knowledge and experience to take the time and effort to share your experiences with the next generation entering the electrical industry.

I believe Mike Holt epitomizes what it means to give back and help newcomers to the electrical industry. I have found the information offered by Mike to be an invaluable tool in learning about the electrical industry. This respect for Mike and his work led me to contact him after reading several newsletters where Mike helped the little guys in the electrical industry get the word out on their new electrical products. As I am sure everyone has experienced, it is a rare event when unsolicited emails are returned in a timely fashion. I can tell you I was floored when Mike responded to my email the next day regarding the product I had been developing. Mike generously offered to help me spread the word about the product I have been working to develop.

Approximately three years ago I was working on an electrical renovation project for a local park district and the park superintendent had an interesting request. The existing electrical system included receptacles mounted on steel posts throughout the park to serve various temporary events such as summer festivals, farmer’s markets, and Christmas decorations. Most of the time the receptacles were not in use and the superintendent was tired of having to mow around the posts and generally thought they were an eyesore when compared to the rest of the park. He asked that the electrical renovation include the installation of a device that would allow the receptacles to disappear when not in use.

I performed an exhaustive search for a product that provided this functionality and assumed that the reason I could not find such a product was because I just did not know where to look. After talking to a few more seasoned individuals in the industry, I realized that a product to allow the receptacles to disappear did not exist. I then decided to develop a product to fill this void. After sketching out many different ideas and a lot of tinkering in my basement, I felt like I had come up with a solid idea for a retractable receptacle.

I was fortunate enough to receive a patent for my idea and I am now seeking to commercialize the product. To date, I have done all of the development work on the retractable receptacle myself. However, my past experiences have taught me that working with experienced partners leads to greater successes than approaching problems independently. Therefore, I am seeking partners to help develop my idea into a commercial product.

I am very grateful to Mike Holt for sharing this information with his subscribers. The base of knowledge and experience represented by this group is incomparable in the electrical field and I know the feedback from this group of people will be more beneficial than any other feedback I can receive. I appreciate your time to read this letter and hope that you will review my product further at my website www.powerdugout.com I have included a couple of pictures of the prototype of the product which I installed in my yard. I appreciate any and all comments and they can be sent to me via my website, this newsletter, or you can email me at powerdugout@gmail.com

Sincerely,

John Neyens

Image2

 

footer
This newsletter was sent to 24231 Subscribers
Comments
  • I want to thank everyone for your comments on the Power Dugout. As several of you have stated, there are several challenges to a product of this nature. Water entry is probably first among them. I designed the vault such that when the receptacle is retracted and the lid is closed, a watertight seal is formed to keep surface water from entering the vault. When the receptacle is extended, the lid is not watertight. The bottom of the vault is open to allow any water that enters the vault to drain out the bottom during this condition. During the next round of design changes, I intend to look at methods to make the vault watertight in both positions. A UL listing is also a necessity. I have talked to UL about getting this product listed, but have not initiated the process just yet. I am hoping to gain a partner with a little more experience in the manufacturing process and then initiate the UL process.

    John Neyens  October 3 2012, 4:57 pm EDT

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter