This article was posted 11/24/2009 and is most likely outdated.

Article 680 Pools and Similar Installations - Part 2 of 2
 

 

Topic - NEC
Subject - Article 680 pools and Similar Installations - Part 2 of 2

November 24, 2009
This newsletter was sent to 19464 newsletter subscribers
Ask a Question |  Weekly Code Graphic |  Quizzes |  Free Stuff |  Instructors | Online Training |  Products | Seminars | Subscribe | Unsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Article 680
Swimming Pools, Spas, Hot Tubs, Fountains, and Similar Installations
Based on the NEC 2008 Edition

 

Image1
We at Mike Holt Enterprises try to provide as much as we can to the industry at no charge. For this reason we’ve created a free Swimming Pools, Spas, Hot Tubs, Fountains, and Similar Installations booklet. The material in this booklet was extracted from Mike's Understanding the 2008 NEC, Volume 2 textbook.

Because of its size, we made it available to you in 2 parts. These parts are available for you to download separately if your computer has restrictions on file size:
Scope of Part 1 of 2 – Articles 680.1 – 680.25
Scope of Part 2 of 2 – Articles 680.26 – 680.74

Click here or on the image to download the complete pdf. Please note that the file is 24 pages, and 5.14MB and may take a few minutes to download depending on your internet connection speed. If you encounter a problem opening this file, be sure you have the latest version of Adobe Acrobat installed on your system (click here).

To purchase your copy of Mike Holt’s Illustrated Guide to Understanding the National Electrical Code Volume 2, 2008 Edition, please click here or call our office at 888.NEC.CODE(632.2633) for more information.

 
Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here
 
Comments

  • MIKE I HAVE A QUESTION ABOUT TWO METAL CONDUITS ATTACHED TO A APPROVED POOL LIGHT J BOX. WE HAVE PVC CONDUITE FROM THE PVC LIGHT FORMING SHELL WITH #8 INSOLATED WIRE AND THE ELECTRICIAN HAS PVC CONDUIT TO THE SWITCH. YOUR COMMENTS STATED THAT TWO METAL CONDUITS MUST SUPPORT THE J BOX. WHAT IS THE BEST WAY TO CORRECT THIS. THIS SITE IS GREAT THANKS, MIKE

    MIKE SHAND

    • Reply from: MikeHolt   
    Replace the pVC with meta; raceways...

    Reply from: Raymond G Jones   
    Good question Mike. Watching for answer. Supporting metal or PVC "J" box with metal or PVC conduit? Have not built pool in over three years. Seem to recall we enclosed the #8 ground inside conduit all the way back thru "J" box to ground at load center with PVC conduit and "J" box?

    How is new house project moving? Keep me posted if needed.

    Ray, Home Connection, Groveland

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter