This article was posted 01/26/2012 and is most likely outdated.

Mike Holt Newsletters
 

 

Topic - Lightning and Surge Protection
Subject - Gas tubing fires linked to lightning raise concern

January 26, 2012
This newsletter was sent to 18817 newsletter subscribers

Ask a Question |  Continuing EducationQuizzes |  Free Stuff Instructors Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ]  

Gas tubing fires linked to lightning raise concern

 

By KANTELE FRANKO, The Associated Press

ImageWESTERVILLE, Ohio — Reports of lightning-related fires and gas leaks in at least a dozen states have raised concerns about the use of flexible gas lines made of corrugated stainless steel tubing and have led to lawsuits, studies and efforts to better track the incidents.

Manufacturers have defended the plastic-coated metal tubing, known as CSST, which has become increasingly common in new homes since it was introduced domestically more than two decades ago. Fire officials and researchers are trying to determine whether to blame a faulty product, unsafe installation or something else for the blazes.

Four homes caught on fire in central Ohio over a stormy 12-hour period this summer. Genoa Township Fire Chief Gary Honeycutt said he believes lightning struck at or near the homes, and the electrical charge traveled along the CSST before jumping to a less resistant pathway nearby such as a metal ventilation duct. It then punctured a hole the size of a pencil tip in the tubing and created a gas leak that could ignite, he said.

Click here to read the full story from the Dayton Daily News.

 

Click here to post a comment

[ Post Your Comments | View Comments | Notify Me When Comments Are Added ]
[ View More Newsletters ]

Bookmark and Share


Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

 

 
Comments
  • As I understand it, arcing on CSST can occur where it is bent because the static charge will jump the gap to the nearby surface of the CSST rather than follow the surface of the corrugation because that is the path of least resistance. This can cause a perforation and an ignition source and dosen't need to be close to another grounded surface to cause the problem.

    Chas Bruner  January 27 2012, 11:04 am EST

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter