Grounding vs Bonding Online Training

This article was posted 03/17/2006 and is most likely outdated.

Grounding vs Bonding: 250.86 Other Enclosures

March 17, 2006

View Comments | Add Comments | Notify Me When Comments Are Added

PART IV. GROUNDING (BONDING) OF ENCLOSURE, RACEWAY, AND SERVICE CABLE

VIEWING Video FILE requires
Real Media Player [ FREE ]

Sections

250.86 Other Enclosures.

Metal raceways and enclosures containing electrical conductors that operate at over 50V [250.112(I)] must be grounded (bonded) to an effective ground-fault current path [250.4(A)(5)].

Author’s Comment: Metal raceways and metal enclosures containing circuit conductors from electrical supply sources that operate at 50V or less aren’t required to be grounded [250.86]. For example, metal boxes used with power-limited fire alarm circuits operating at 50V or less aren’t required to be grounded.

Exception 2: Short sections of metal raceways used for the support or physical protection of cables aren’t required to be grounded (bonded) to an effective ground-fault current path. Figure 250–123

Author’s Comment: NM cable on a wall of an unfinished basement installed, in a listed metal raceway, must be grounded to an effective ground-fault current path [334.15(C)].

Exception 3: Metal elbows having 18 in. or more of earth cover aren’t required to be grounded (bonded) to an effective ground-fault current path. Figure 250–124

Figure 250–123
(Click on image to enlarge)

Figure 250–124
(Click on image to enlarge)

Comments

This is not an easy one to follow, but let me try... 250.86 states "Except as permitted by 250.112(I), metal enclosures and raceways for other than service conductors shall be grounded."

This appears simple enought, then when you visit 250.112(I), it states "Power-Limited Remote-Control, Signaling, and Fire Alarm Circuits. Equipment supplied by Class 1 power-limited circuits and Class 1, Class 2, and Class 3 remote-control and signaling circuits, and by fire alarm circuits, shall be grounded where system grounding is required by Part II or Part VIII of this article."

Now the key to your answer (metal raceways and enclosures not required to be grounded (actually bonded) is contained in Part II of Article 250, sepcifically 250.20(A).

Reply to this comment


* Your Name:	Your name will appear under your comments.
* Your Email:	Your email address is not displayed.
* Comments:	This newsletter is closed to new comments. Email Notification Options: Notify me when a reply is posted to this comment Notify me whenever a comment is posted to this newsletter