This article was posted 11/18/2010 and is most likely outdated.

Utah to Adopt Licensing Requirements for PV Systems
 

 


Subject - Utah to Adopt Licensing Requirements for PV Systems

November 18, 2010
This newsletter was sent to 16502 newsletter subscribers
Ask a Question |  Continuing Education |  Quizzes |  Free Stuff |  Instructors |  Products | Seminars | Subscribe | Unsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ]  

Utah to Adopt Licensing Requirements for PV Systems


From: Ann Naegelin [mailto:anaegelin@utah.gov]
Sent: Thursday, November 18, 2010 1:16 PM
Subject: Fwd: S202 rule change proposal
Following is the language Dan prepared after the discussion today at the Electrical Board meeting re: S202 classification.  This language will be reviewed by the Commission on November 24, 2010.

Please note.  This language may need some editing to comply with rule drafting manuals or recommendations. 

S202 - Solar Photovoltaic Contractor.  Fabrication, construction, installation, and repair replacement of photovoltaic cell panels and related components.  including battery storage systems, distribution panels, switch gear, electrical wires, inverters, and other electrical apparatus for solar photovoltaic systems. Work excluded from this classification includes work on any alternating current system or system component. 

Wiring, connections and wire methods as governed in the National Electrical Code and subsection R156-55b-102(1) shall only be performed by an S200 General Electrical Contractor or S201 Residential Electrical Contractor.  Stand alone solar systems that do not incorporate premise wiring, such as (but not limited to); street /parking lighting, signage, and RV’s are exempt from S202 licensing.

Division of Occupational and Professional Licensing
P O Box 146741
Salt Lake City UT  84114-6741
telephone (801) 530-6396
fax (801) 530-6511
anaegelin@utah.gov

Mike Holt’s Comment: I support the revised text by the Electrical Contractors Board and will notify Mr. Dan Jones my support. If you have an opinion for or against, send your thoughts to Mr. Jones at dansjones@utah.gov. He will forward your email comment to each commission member.

 

 

Click here to post a comment

[ Post Your Comments | View Comments | Notify Me When Comments Are Added ]
[ View More Newsletters ]

Bookmark and Share


Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

 
 
Comments

  • This apparently addresses the installation (wiring, etc). My concern is the design: structural load, wind load (and snow/blown snow load), maintenance access, roof penitration(s), equipment mounting method, effect on fire protection. Many of these smaller projects originate by way of solar equipment mfgrs./contractors, not by way of qualified architects, structural engrs, etc. I believe it would be difficult for an inspector to be able to determine if the installation is "stable"/mechanically safe without any signed/sealed drawings from a registered professioal. I'm sure the structure (home, business, etc.) insurer would like to be confident that the installation won't blow away in the next fall wind storm or cause the building to collapse.

    W. L. Ramage, P.E.
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter