EC&M has partnered with NEC expert Mike Holt to present a one-hour Webinar covering the top 2011 NEC Code Changes. This one-hour event will be broadcast live on the web with streaming audio and PowerPoint slides allowing the audience to have real-time interaction with the guest speaker, Mike Holt. Mike Holt is recognized as one of the electrical construction industry’s most knowledgeable and popular trainers. He has extensive experience as an author, speaker and trainer on design and installation topics relative to the NEC. Don’t miss this opportunity to learn about the top 2011 NEC code changes.
Code Changes Covered:
• Available Fault Current
• GFCI Protection
• GFCI Non-dwelling Receptacles
• GFCI Protection Receptacles Indoor Wet Location
• GFCI Protection Locker Room Receptacles
• GFCI Protection Garage, Service Bay, and Similar Area Receptacles
• Basement, Garage and Accessory Building Receptacles
• Hallway Receptacles
• Foyer Receptacles
• Electrodes Permitted for Grounding
• Concrete Encased Electrode
• Use of Equipment Grounding Conductors
• Cables Under Buildings
• Nonfire-Rated Ceiling Assemblies
• Power Distribution Block – Junction and Pull Boxes
• Switches Controlling Lighting
• Receptacle Replacements
• Tamper Resistant Receptacles in Dwelling Units
• Tamper Resistant Receptacles in Guest Rooms and Guest Suites
• Tamper Resistant Receptacles in Child Care Facilities
• Disconnecting Means
• Receptacles with Insulated Grounding Terminal
• Perimeter Surface Equipotential Bonding
• Grounding Electrode System