This article was posted 12/30/2009 and is most likely outdated.

Eagle GFCI Receptacle Problems
 

 

Topic - Safety
Subject - Eagle GFCI Receptacle Problems

December 30, 2009
This newsletter was sent to 19248 newsletter subscribers
Ask a Question |  Weekly Code Graphic |  Quizzes |  Free Stuff |  Instructors | Online Training |  Products | Seminars | Subscribe | Unsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Eagle GFCI Receptacle – Safety Alert?

Hello Mike, Image1

Have you heard of any problems with Eagle GFCI receptacles? As a 20 year plus Electrical Contractor I have never had a problem like this. This happens to be in my home. I noticed a charring of the area around an exterior GFCI outlet on my front porch. I removed the outlet to find the attached picture. The unit was still arcing as I had it in my hand. Really lucky that I did not have a fire. I have several of these outlets in my home. Do you think I should change them out? If so should I bring this to the attention of the manufacturer? Looks like the device was made in China.
Anthony

Mike Holt’s comment: If anyone has any information or experience with this receptacle, please let us know by posting your comments.

 

 
Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here
 
Comments

  • Anthony, This is undoubtedly anothter "made in China: fiasco. I would contact the CPSC to alert them. They may also know about this already and have issued an alert. What is worse is that there may be millions of these units out there already. I have had to replace countless GFCI's that do not work correctly or sometimes not at all. I have found that the greater problem with these are when they are located in damp locations and is not limited to just this one manufacturer. Most have been manufactured in China but not all. Swapping the others is a best safety idea, but you should at least check the others immediately. It is likely that all of these units are the same in the dwelling which means a high risk level

    PETE.R
Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter