This article was posted 01/26/2009 and is most likely outdated.

Energy Plan Jolts Emporia Families
 

 

Subject - Energy Plan Jolts Emporia Families

January 26, 2009
This newsletter was sent to 30937 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Energy plan jolts Emporia families

Westar wants to expand a substation in Emporia to accommodate Hill's, but neighbors are alarmed

ImageEMPORIA — Joanne Evans is leery of washing dishes in the kitchen of her eastside home.

There is reason to cast a wary eye out the window while standing at the sink overlooking a Westar Energy substation. The kitchen appears to be a magnet for stray voltage suspected of escaping from the towering web of steel framing, wire and transformers that casts a shadow over Evans' neighborhood.

Members of her family say they have endured shocks since the home was bought in 2004 — a purchasing decision made by the Evanses after the Topeka utility gave a clean bill of health to a substation that went into operation during the Great Depression.

 

Click here to read the full article by Tim Carpenter, The Capital-Journal.

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • Also do not forget to bond the electrical service ground to the reinforcing mesh in floor slabs as well as metel drain pipes. If drain pipes are plastic, insert a length of schedule 40 brass or copper pipe using hubless cast iron couplings and then bond to that. Also bond the hot and cold water pipes that are attached to an electric or electrically operated water heater.

    Michael R. Cole

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter