This article was posted 08/26/2008 and is most likely outdated.

Electrical Wire Splices Recalled Due to Shock and Fire Hazards
 

 

Topic - Safety
Subject - Electrical Wire Splices Recalled Due to Shock and Fire Hazards

August 26, 2008
This newsletter was sent to 29745 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

NEWS from CPSC

U.S. Consumer Product Safety Commission

Office of Information and Public Affairs

Washington, DC 20207


FOR IMMEDIATE RELEASE
August 20, 2008
Release #08-367

Firm's Recall Hotline: (800) 624-4320
CPSC Recall Hotline: (800) 638-2772
CPSC Media Contact: (301) 504-7908

Electrical Wire Splices Recalled Due to Shock and Fire Hazards

WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed.

Name of Product: Electrical Wire Splices (also known as Butt Splice Connectors)

Units: About 53,000

Manufacturer: Molex, of Lisle, Ill.

Hazard: The splice can fail to hold the wires adequately together, posing a shock and fire hazard to consumers.

Incidents/Injuries: Gardner Bender has received one report of a recalled butt splice failing to hold wires together. No injuries have been reported.

Description: The recalled butt splices are used to connect electrical wires to one another. They are typically used for wiring small electrical appliances, like audio equipment, or in automotive applications. The splices are yellow insulated vinyl and measure about one inch long and ¼ inch wide. They were intended for use with 12-10 AWG wire. 12-10 is stamped on the side of the splices. Model numbers 10-126, or 21-126, and Gardner Bender are printed on the product’s packaging. They were sold in packages of 8 or 50.

Sold at: Electrical distributors, hardware stores, and home centers nationwide from June 2005 through April 2008 for between $1 and $5.

Manufactured in: United States

Remedy: Consumers should immediately stop using products that contain the recalled butt splices and contact the firm for free replacement splices.

Consumer Contact: For additional information, contact Gardner Bender at (800) 624-4320 between 8 a.m. and 5 p.m. CT Monday through Friday, or visit the firm’s Web site at www.gardnerbender.com

Picture of Recalled Electrical Wire Splices

Picture of Recalled Electrical Wire Splices

 

 

 

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
    No comments to display

Add Your Comments to this Newsletter
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

This newsletter is closed to new comments.

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter