Fluke 17XX Quadcable Recall

Electrical safety is our key concern and I'm always looking out for information that will help keep the industry safe. I wanted to pass along this information about a product recall. Work safely.

Fluke Corporation has identified a safety issue affecting FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N cables produced from April 2021 up to and including November 2021 (the “Recalled Cables”). The Recalled Cables are sold separately as 3PHVL-17XX Cable Replacement Kits and are included with the following kits:

Fluke-3540 Power Monitors
173x Series Power Loggers
174x Series Power Quality Loggers
177x Series Power Quality Analyzers
As a consequence, Fluke has decided to recall all the Recalled Cables and provide impacted customers with a free replacement.

Model: FLUKE-17XX, Flat Cable, Voltage Test Lead 3-phase+N

Remedy: Please IMMEDIATELY STOP using your Recalled Cable. Please register your Recalled Cable following the below instructions and make it unusable by cutting it in half. You will be asked to confirm destruction of your Recalled Cable during registration. Your Recalled Cable will be replaced at no cost.

The Recalled Cables have date codes falling within the following range: Manufacturing dates: April 2021 - November 2021
Starting Date Code: 21-04
Ending Date Code: 21-11 (inclusive)

Finding the date code: The date code of the cable can be found on both overmolds of the cable and is shown by two imprinted date wheels. The first wheel indicates a two-digit year and the second wheel indicates a month number. For example, the image shows “21” and “11”, corresponding to November 2021, which would indicate that this particular cable is affected by this recall.
1.1: Year wheel, affected position in red.
1.2: Month wheel, affected positions in red.

Visit the Fluke website to Register your Recalled Cable, and for other information.

Contact information can be found at: https://www.fluke.com/en-us/support/technical-support.