Mike:
Is this article intended to or can it be applied to common mode noise current caused by the application of Pulse Width Modulated Variable Frequency Drives?? Common Mode noise currents are typically higher frequency but can cause electromagnetic interference with automated computerized control systems. Typically shielded cable is recommended between the drive and the motor with all motor grounding going back to the ground on the drive in order to conatain the noise between the drive and the motor. I geuss I am wondering if this article is a mandate to use shielded cable.
Thanks again for a great newsletter Mike.
-Scott Stocking
Product Manager - Drives / MCC Equip
French Gerleman Electric
STL Scott
|