This article was posted 06/06/2007 and is most likely outdated.

Lamson & Sessions Recalls Floor Electrical Outlets Due to Shock or Electrocution Hazards
 

 

Topic - Safety
Subject - Lamson & Sessions Recalls Floor Electrical Outlets Due to Shock or Electrocution Hazards

June 6, 2007
This newsletter was sent to 26050 newsletter subscribers

Ask a Question |  Weekly Code GraphicQuizzes |  Free Stuff InstructorsOnline Training Products | Seminars | SubscribeUnsubscribe
[ image1 Post Comments | View Comments | Notify Me When Comments Are Added ] Web Page Version [Printer-Friendly]    

Image 1Lamson & Sessions Recalls Floor Electrical Outlets Due to Shock or Electrocution Hazards

WASHINGTON , D.C. – The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. (To access color photos of the following recalled products, see CPSC’s Web site at www.cpsc.gov.)

Name of Product: Carlon® Drop-In Floor Boxes

Units: About 100,000

Manufacturer: Lamson & Sessions, of Cleveland, Ohio

Hazard: The recalled floor boxes are wired incorrectly resulting in reverse polarity. This poses a shock or electrocution hazard to consumers.

Incidents/Injuries: Lamson & Sessions has received one report of an incident with the recalled floor boxes. No injuries have been reported.

Description: The drop-in floor boxes are used to provide an extra electrical outlet in the floor. Image 2

They were sold under the Carlon® brand name and have a brass finish cover approximately 3 ½ inches in diameter.“Carlon” is stamped into the plastic above the receptacle and the model number is located to the left of the receptacle. Model numbers E971FBDI and E971FBDIB are included in this recall.

Sold at: Homecenters, hardware retailers and electrical distributors nationwide between January 2005 and March 2007 for about $35.

Manufactured in: China

Remedy: Consumers should immediately unplug anything that is plugged into the floor box and contact Lamson & Sessions to determine if their floor box is included in the recall. Consumers with recalled units will receive a free repair. Click here to view repair procedure.

Customer Contact: For additional information, call Lamson & Sessions toll-free at (866) 636-1531 between 8:30 a.m. and 5 p.m. ET Monday through Friday.

Mike Holt Comment: Another example where we can't depend on others to ensure safe electrical installation. Be sure to always test all receptacles (click here for details) after they have been installed to verify that the device is wired properly.

Click here to post a comment
[ View More Newsletters ] [ Send to a Friend ] [ Post Comments | View Comments | Notify Me When Comments Are Added ]

Copyright © Mike Holt Enterprises, Inc. All rights reserved.
This article is protected by United States copyright and other intellectual property laws and may not be
displayed or published on the internet without the prior written permission of Mike Holt Enterprises, Inc.

http://www.MikeHolt.com     1-888-NEC-CODE (1-888-632-2633)

Experiencing a Problem? Click Here

 
Comments
  • Contacted Lamson&Sessions About Home owner doing electrical work . Was told if home owner call an Electrical Contractor in to correct reverse wiring they will paid a MAX. OF $50 TO HOME OWNER, any service charge above that would be on the owner.

    Lou roselle

Reply to this comment
* Your Name:
   Your name will appear under your comments.

* Your Email:
   Your email address is not displayed.
* Comments:

Email Notification Options:
Notify me when a reply is posted to this comment
Notify me whenever a comment is posted to this newsletter